At the Geneva International Motor Show today, Hyundai Motor Co. and GE Plastics presented QarmaQ, a first in the Crossover Coupe segment. QarmaQ is Hyundai's Advanced Technology Demonstration Vehicle (ATDV) that showcases over 30 different environmentally progressive technologies led by the innovative “Elastic Front™”, an innovative solution that can help reduce the risk of severe injuries in Crossover Utility Vehicles (CUV) pedestrian collisions.

Hyundai QarmaQ Car ConceptHyundai QarmaQ Concept

Designed at Hyundai Motor Europe's Design and Technical Center in Russelsheim and engineered in close cooperation with GE Plastics, QarmaQ develops and validates over 30 key technologies, which will be selectively incorporated into Hyundai’s new models to be rolled out from 2008-2014.

“At Hyundai, we believe in innovation for humanity, and QarmaQ demonstrates our commitment to safety innovation and our determination to bring more environmentally responsible technologies to the market,” said Dr. Kwon Moon-Shik, Hyundai Motor's vice president of advanced technology. “We chose to partner with GE Plastics because of their commitment to the environment and their wide range of innovative materials and technical capabilities. Technologies from QarmaQ will provide Hyundai owners with a safer, more environmentally responsible car and a better driving experience.”

QarmaQ is lighter, stronger and more economical than any current production CUV in its class. It also offers significant recycling advantages both in construction and eventual disassembly. In short, it is a viable and realistic glimpse of the future potential of personal automotive transport.

Hyundai QarmaQ ConceptHyundai QarmaQ Concept

The issue of pedestrian safety is a growing one. In the EU, one-fifth of all traffic fatalities – 7,000 people per year – are pedestrians hit by a vehicle. In densely populated Korea, the rate is as high as 39 percent. QarmaQ's Elastic Front™ safety system, which encompasses the whole front end of the vehicle, is arguably the world's first global pedestrian protection solution on a CUV. Three energy-absorbing structures are fully integrated underneath the futuristic styling of QarmaQ and this system takes advantage of several advanced materials that offer inherent energy absorbing properties. QarmaQ's body panels have been designed to work in concert with energy-absorbing systems on the underside of these panels to manage and dissipate the force of a pedestrian/CUV collision. The Elastic Front™ has been engineered to meet EEVC WG17 Phase2, Euro NCAP, and JNCA pedestrian impact requirements and is currently undergoing testing for final validation.

The Hyundai QarmaQ concept car is the result of the fusion of exceptional expertise and engineering foresight from Hyundai and GE Plastics. More than a design concept, QarmaQ illustrates that environmentally responsible solutions can be elegantly incorporated to enhance safety, design and performance.

"GE Plastics is committed to developing greener, lighter and aesthetically pleasing solutions to support our customers in creating vehicles with reduced environmental impact," said Gregory A. Adams, vice president and general manager, GE Plastics – Automotive. "We are delighted to have collaborated with Hyundai and we believe that working together we helped them develop an exciting new CUV that demonstrates greater environmental responsibility as well as improved safety, dramatic design, and high performance."

Firmly positioned as a crossover Coupe/CUV, the QarmaQ derives its name from traditional Inuit dwellings, constructed from earth, whalebone and animal skins. Like them, QarmaQ challenges conventional ideas on construction methods and materials. Also in common with the original structures, it boasts unusual strength, resilience and protection.

This 2+2 vehicle targets the important empty next baby boomers demographic, who are rediscovering a new-found freedom while remaining the wealthiest demographic in history. Today, this key group of consumers is beginning to spend their nest egg and enjoy the fruits of their labour, not on material possessions, but on experiences. QarmaQ soulfully blends the driving experience of a Coupe with the ability to manage multi-terrain driving of a CUV, providing empty nesters with effortless access to their outdoor playground.

Hyundai QarmaQ Car ConceptHyundai QarmaQ Car Concept

As a joint project with GE Plastics, QarmaQ endowed designers with greater expressive freedom to create complex three-dimensional shapes that could not have been achieved with conventional production methods and materials such as metal and glass.

"The powerful profile and stance of the design incorporates dynamic, sculptural qualities and elegant sportiness on one hand, with smooth refined surfaces on the other," said Thomas Bürkle, chief designer, Hyundai Motor Europe. "Moreover, the various properties of the GE materials allowed more freedom in meeting or even exceeding safety requirements. The result is a uniquely balanced and harmonic design both inside and out," he added.

Departing from conventional car design that combines a lower body and a glass cabin on top, QarmaQ blazes a new trail with panoramic wrap-around glazing area using GE’s Lexan™ polycarbonate resin. This part sits between the two pronounced “muscles” above the front and rear wheels. The C-shaped side window enables innovative helicopter-like downward visibility and is a key design feature demonstrating the new glazing technology.

Connected by unique glazed surfaces, the exterior design relates strongly to, and interacts effortlessly with the interior. The unique division between the solid bodywork and transparent glazed areas creates a new perspective, whether viewed from inside or from the pedestrian standpoint. The exterior contours and fluidity of line have been refined to give an immediate impression of movement frozen in motion. This aesthetic is mirrored in the interior, so that the fusion and merging of the perceptual boundaries between inside and out delivers a feeling of integration and synchronization to the overall appearance.

”The QarmaQ’s exterior design communicates a commanding presence and a feeling of protection to the occupants,” said Robert Butterfield, global market director, GE Plastics. “ The twin domes on the sunroof, facilitated by the new glazing technology, increases the inner space for the rear passengers and creates a unique design feature.” The wrap-around windscreen, in combination with the elongated bonnet delivers dramatic, almost classic, proportions and gives the car a unique sporty feeling. Finally, the contrast of the strong dark coloured areas to the lighter tonal areas emphasizes QarmaQ’s off-road DNA.

In response to shrinking family sizes and emergent customer preferences, QarmaQ is specifically designed to carry four people in above average comfort. The extensive use of new materials and techniques has resulted in a more fluid, more unified interior, by allowing seamless integration of otherwise intrusive elements. As the sporting exterior proportions suggest, the QarmaQ is primarily a driver’s car. Within its unique interior architecture the cockpit is isolated in an active, yet protective pod structure. This helps promote a sensorial and highly self-indulgent driving experience.

The colour harmony of the interior has been designed to enhance the feeling of serenity and spaciousness, which in turn relates directly to the high level of comfort enjoyed by the passengers. The mixed effects, textures and colours add sophistication to the dynamic forms and strong presence of the car. Functional elements made from aluminium emphasise the more technical aspects, contrasting with and highlighting the softness of the interior materials.

Current composite technology is usually thought too expensive and too difficult to fabricate to be of use anywhere but the aerospace and motor racing industries. The QarmaQ is physical proof that this need not be so. The wrap-around GE Lexan™ windscreen and extensive use of GE polycarbonate glazing materials provides a weight saving of up to 50 percent in relation to glass, while simultaneously allowing more adventurous shapes than flat glass. The glazing features a unique technology from Exatec™ which deposits a thin protective layer of glass on the Lexan™ to add protection from scratching and the effects of weathering.

QarmaQ also introduces new curved and moving side glazing in Lexan. As well as allowing such advanced applications, the impact resistance and other properties of this material also helps increase both occupant and pedestrian safety. Exatec™ infrared coatings on the whole transparent areas reflect heat, helping cool the interior and reducing the power demands upon the infrared regulated air conditioning. Lighting is achieved by incorporating mood illumination into the actual material, delivering a unique interior ambience. The material also facilitates a perfectly flat, fully integrated fractal radio antenna within the roof structure.

QarmaQ's 2-liter diesel engine is fully compliant with EURO5 emission regulations. It features the very latest technologies such as high pressure fuel injection and fine fuel spray atomization for higher torque and better power output. Regulated emissions such as CO, THC, NOx and PM, were reduced drastically while a Catalyzed Particulate Filter system, CPF, is capable of cleaning about 90 percent of the particulate matter from the diesel emissions. Furthermore, by switching the position of CPF from the under-floor area to a location more closely coupled to the exhaust manifold, it was possible to minimize the catalytic light-off time and to enhance the naturally regenerative characteristics of the CPF.

Thanks to extensive use of advanced materials, QarmaQ is 60 kg lighter than a comparable vehicle made with traditional materials. GreenOrder, an environmental strategy firm based in New York, N.Y. that audited the Qarmaq estimated that the 60 kg. that have been taken out of the Qarmaq, means the vehicle would require about 80 fewer litres of diesel per year, and would cut annual greenhouse gas emissions by more than 200 kg. Furthermore, if every new vehicle registered in the European Union (EU-15) in 2006 had reduced fuel consumption by the same amount, the result would have been an annual savings of more than 7.4 million barrels of diesel fuel -- or enough to sustain the European Union (EU-15) diesel demand for three days.

As a result, the greenhouse gas savings would equal approximately 3.1 million metric tons of carbon dioxide. According to Joseph Malcoun, an Associate with GreenOrder, cutting edge material technologies are expected to make a major contribution to increasing the fuel economy of tomorrow’s passenger vehicles. “As consumer demand for more fuel efficient vehicles continues to grow, we expect the use of advanced materials to play an increasing role in reducing the greenhouse gas footprint of the cars we drive.” HPPC composites for horizontal body panels significantly reduce part weight - up to 50 percent per part - while maintaining strength equal to that of steel. This lighter-weight cladding contributes to better fuel efficiency and improved power-to-weight ratio for drivers and its energy absorbing qualities are harnessed to create the Elastic Front™ safety system.

QarmaQ's body panels use an environmental responsible plastic, Xenoy iQ™ and Valox iQ developed as part of GEs ecomagination™ initiative to address three critical environmental concerns: conserving energy, lowering greenhouse gas emissions, and up-cycling or re-using materials such as PET plastic bottles. QarmaQ re -uses approximately 900 PET bottles that would otherwise become landfill. Another environmentally progressive aspect of the QarmaQ’s design is the use of GE paint replacement technologies, including Visualfx™ resins with Lexan™ films, to replace painting operations that can release toxic and greenhouse gases.

GE Plastics (www.geplastics.com) is a global supplier of plastic resins widely used in automotive, healthcare, consumer electronics, transportation, performance packaging, building & construction, telecommunications, and optical media applications. The company manufactures and compounds polycarbonate, ABS, SAN, ASA, PPE, PC/ABS, PBT and PEI resins, as well as the LNP* line of high-performance specialty compounds. GE Plastics, Specialty Film & Sheet manufactures high-performance Lexan* sheet and film products used in thousands of demanding applications worldwide. In addition, GE Plastics’ dedicated Automotive organization is an experienced, world-wide competitor, offering leading plastics solutions for five key automotive segments: body panels and glazing; under the hood applications; component; structures and interiors; and lighting. As a Worldwide Partner of the Olympic Games, GE is the exclusive provider of a wide range of innovative products and services that are integral to a successful Games. For more information on GE’s materials for automotive applications, please go to www.geplastics.com.

Hyundai Motor America, headquartered in Costa Mesa, Calif., is a subsidiary of Hyundai Motor Co. of Korea. Hyundai vehicles are distributed throughout the United States by Hyundai Motor America and are sold and serviced through more than 800 dealerships nationwide. All Hyundai vehicles sold in the U.S. are covered by the Hyundai Assurance program, which includes the 5-year/60,000-mile fully transferable new vehicle warranty, Hyundai’s 10-year/100,000-mile powertrain warranty, and five years of complimentary Roadside Assistance.

The final design of the flying car was achieved in collaboration with a team of Italian designers. The interior elements that remind of a conventional car are the steering wheel,...read more

At the 2009 Frankfurt Motor Show, Ford of Europe is showing the first of a fleet of Battery Electric Vehicle (BEV) prototypes based on the Ford Focus, and specially developed to...read more

Fiat will present the first official images of the Fiat 500L, the new model which will have its world preview at the International Geneva Motor Show on 6 March this year...read more

Hyundai Motor America has announced prices for its all-new Tucson CUV (Crossover Utility Vehicle), starting at $18,995 for a well-equipped GLS six-speed, manual-transmission model and $24,345 for the...read more

Volkswagen Touareg V8 TDI made its official debut at 2019 Geneva Auto Show. What do we find under the hood? It's a 4.0-liter turbo diesel engine that produces no less...read more

Autumn 2006, Paris motor show: Rolls-Royce Motor Cars announced that work had begun on a new model series. The new car would be in production and on sale by the turn of the...read more

The new e-tron model series from Audi will gain another new member at the Geneva Motor Show: The Audi A1 e-tron is a Mega City Vehicle (MCV) with an innovative...read more

The brand new Hyundai Tucson has experienced the final and final steps of testing and quality assurance. After an extensive development phase at Hyundai's test centers, test tracks...read more

The award-winning Elantra enters 2010 with a bang, offering improved fuel efficiency, stylish design, and an array of smart features that make it a standout in the compact car...read more

Combining dynamic, sophisticated styling with maturity and prestige, the all-new cee’d five-door hatchback makes its world debut at the 2012 Geneva Motor Show.The new cee’d is longer,...read more

Categories